My review on the Audio Technica ATH-M50s Headphones overall quality 8.5/ 10 rating comfortable affordable flat frequency response durable monitoring, mixing and recording tracks purposes. solid conductors collapse frame any questions or comments feel free to respond! thank you!! Audio Technica ATH-M50s Headphone Review TYPE Closed-back dynamic DRIVER DIAMETER 45 mm MAGNET Neodymium VOICE COIL CCAW (Copper-clad aluminum wire) FREQUENCY RESPONSE 15 – 28000 Hz MAXIMUM INPUT POWER 1600 mW at 1 kHz SENSITIVITY 99 dB IMPEDANCE 38 ohms WEIGHT 284 g (10 oz) without cable and connector CABLE 1.2 – 3.0 m (3.9′ – 9.8′) Coiled, OFC litz wire CONNECTOR Gold-plated stereo 1/8″ (3.5 mm) connector with strain relief and professional screw-on 1/4″ (6.3 mm) adapter ACCESSORY INCLUDED Protective pouch
HOW TO SET UP MIDI & AUDIO INTERFACE!!! you need to set the AUDIO OUTPUT of your mpc into “MONO MODE” simply follow this instruction from your mpc tap MODE then “PAD 8 MIXER” then if you have like kick from pad 1 snare pad 2 clap pad 3 hat pad 4 what you need to do is tap each pad and set up each L/PAN & L/OUT like this 1. Tap “PAD1 kick” press L/OUT then from the upper part you will see “ST” it means you’re in a STEREO MODE but you need the MONO MODE so turn the DATA WHEEL you should see “12″ and “34″ but you need to set this to “12″ then click L/PAN from the upper part you will see 16 knobs, again tap “PAD1 kick” then click arrow up make sure you high lighted the knob for pad1 then turn the DATA WHEEL to the left now the kick drum should play 2. Tap “PAD2 Snare” press L/OUT then from the upper part you will see “ST” it means your in a “STEREO MODE” but you need the MONO MODE so turn the DATA WHEEL you should see “12″ and “34″ but you need to set this to “34″ then click L/PAN from the upper part you will see 16 knobs, again tap “PAD2 Snare” then click arrow up make sure you high lighted the knob for PAD2 then turn the DATA WHEEL to the “RIGHT” now the snare drum should play repeat this procedures to each instruments hope this info will help you a lot also… MIDI OUT from motif should go to MIDI IN of mpc MIDI OUT from mpc should go to MIDI IN of motif AUDIO OUTPUT of motif should go to your mixer or MIDI & AUDIO interface the same as your mpc.8 audio input is a must!!!
Virtual Scratch Video Demo System by DJ Mind Sauce. Athlon XP 3500+ Nvidia GForce 7300 Virtual DJ 5.1 M-Audio Fast Track Pro Torq Time Coded Vinyl Vestax PCV-150 2 Technics 1200’s